You asked three companies to quote the same job. A new phone system, say, or a roof repair, or a cleaning contract.
The quotes came back in three different formats. One is a single line with a total. One is four pages of line items. One has a monthly price that looks cheapest until you spot the three-year term on page two.
You can't tell which is the better deal, so the decision sits in your inbox.
An AI assistant can't pick the vendor for you. But it's very good at the tedious part: putting three messy quotes into one table, so the differences are obvious and you know what to ask before you sign.
The quick answer
- Take out what you wouldn't share, then upload or paste each quote into the AI tool your business already uses.
- Ask it to extract, not judge: one table, same rows for every quote, "not stated" where a quote is silent.
- Ask what's missing from each quote compared with the others. Those gaps become your questions for each vendor.
- Check every number in the table against the original quote before you use it.
- Send each vendor the same questions, update the table with their answers, then decide yourself.
Why quotes are hard to compare
Most of the time it isn't the price that's confusing. It's that the quotes aren't describing the same job.
Watch for these five differences:
- What's included. One quote includes setup, removal of the old equipment or the first year of support. Another charges for it separately, or doesn't mention it at all.
- Term and renewal. A monthly price on a 36-month agreement is a different commitment from the same price month to month.
- One-time versus ongoing costs. A low install fee can hide a higher monthly fee, and the reverse.
- Exclusions. "Does not include" lines and assumptions ("assumes existing wiring is usable") are where surprise invoices come from.
- Who does the work and when. Start date, how long it takes, and whether the work is subcontracted.
That's exactly the kind of sorting AI does well. Reading three documents side by side and lining up the same facts takes a person an hour. It takes an AI tool a minute.
Before you upload anything
Quotes often carry things that don't need to leave your office: your address, your account numbers, a contact's mobile number. Some vendors also mark their pricing as confidential.
Two rules:
- Use your work account, not a free personal one. If your business runs on Microsoft 365, Microsoft says Copilot Chat used with a work account is covered by its enterprise data protection terms, and that prompts and responses aren't used to train its foundation models. For other tools, who owns the data you feed into AI explains what to check.
- Black out what the comparison doesn't need. Rename the vendors "Vendor A", "Vendor B" and "Vendor C" if you're unsure. The AI doesn't need their names to compare their terms.
Step by step: compare the quotes with AI
1. Give it the job, then the quotes
Start with one or two sentences about what you asked for, so it knows what "complete" looks like:
I asked three vendors to quote a phone system for a 9-person office: 9 desk phones, call recording, and a main number that rings the front desk first, then a group. I need it working by March 1. I'm going to give you the three quotes. Don't recommend one yet.
Then upload the files or paste the text. In Microsoft Copilot Chat, Microsoft's Copilot overview says you add your own content by pasting it, uploading a file or selecting a file with your prompt. Most AI chat tools, including Gemini, ChatGPT and Claude, take a pasted quote or an uploaded file.
2. Ask for one table with fixed rows
This is the prompt that does the heavy lifting:
Put the three quotes into one table. Use these rows for every quote: one-time costs, monthly or recurring costs, total cost for the first 12 months, contract length and renewal terms, what's included, what's excluded or assumed, start date and how long the work takes, warranty or support. If a quote doesn't say, write "not stated". Don't estimate or fill gaps. After each figure, note where in the quote you found it.
"Not stated" matters most. An AI tool asked to fill a table will sometimes fill it with a guess. Telling it not to, and asking where each figure came from, makes guesses easy to spot.
You'll get something shaped like this:
Row | Vendor A | Vendor B |
|---|---|---|
One-time costs | Install and setup listed | Not stated |
Monthly cost | Per user, month to month | Flat fee, 36-month term |
First 12 months total | Calculated from the quote | Calculated from the quote |
Excluded or assumed | Assumes existing wiring | Not stated |
Every "not stated" is a question you need answered.
3. Ask what each quote leaves out
Compare the quotes against each other. For each vendor, list what the others include that this one doesn't mention. Then list anything in any quote that could add cost later: assumptions, exclusions, price increases at renewal, early-termination fees.
This is where the cheapest quote often stops looking cheapest.
4. Check the table against the originals
Spend ten minutes here. Don't skip it.
- Open each quote and find every number in the table. The AI said where it found each one, so this goes quickly.
- Redo the 12-month totals yourself with a calculator. One-time costs plus 12 months of recurring costs. AI tools are better with words than with arithmetic.
- Read the terms section of each quote yourself. Renewal, cancellation and price-increase clauses are short and they're the ones that cost money.
If something in the table isn't in the quote, delete it. How to make sure AI doesn't give you the wrong info has a quick routine for this kind of check.
5. Turn the gaps into questions for each vendor
Write a short, polite email to each vendor with the questions I need answered to compare them fairly. Only ask about things their quote doesn't cover. Number the questions.
Send the same core questions to everyone. Vendors who answer clearly and quickly are telling you something too.
When the answers come back, paste them in and ask for the table again with the gaps filled.
6. Make it argue against your favorite
By now you'll lean one way. Test it:
I'm leaning toward Vendor B. Using only what's in the quotes and their answers, give me the strongest case against choosing them. Then tell me what would have to be true for Vendor A to be the better choice.
If the case against is something you can live with, good. If it's something you missed, you just found it before signing instead of after.
7. Decide, and write down why
Make the call. Then write three lines in the job folder:
- Who you chose and the 12-month total you checked yourself.
- The two reasons that tipped it.
- The dates that matter: start date, end of the term, last day to cancel before it renews.
Put that last date in your calendar now.
Where AI gets quote comparisons wrong
- Arithmetic. Totals, per-user math and anything across 36 months. Always redo the totals.
- Filling gaps. If a quote doesn't mention installation, an AI tool may assume it's included. "Not stated" in your prompt reduces this. Checking catches the rest.
- Scanned quotes. A blurry scan or a photo of a printed page reads less reliably than the original PDF or email. Ask the vendor for a digital copy.
- Legal meaning. It can point you at a clause. It can't tell you what that clause means for your business. For contracts with real money or liability in them, can AI summarize a contract? covers what to check and when to hand it to a lawyer.
- Judgment about people. It doesn't know that one vendor never returns calls, or that another did a great job for your neighbor. You do. That counts.
Make it a habit for every purchase
- Save the prompts from steps 2, 3 and 5 in a shared document. Anyone in the office can use them the next time quotes come in.
- Ask for quotes in the same format. Send vendors your table rows when you request the quote. You'll get easier answers and you'll need AI less.
- Keep the table with the signed contract. At renewal time, you'll know what you were promised.
- One rule for staff: no customer or employee details in an AI tool, and the business's work account only.
When to get help
- The quotes are for technology (phones, internet, Microsoft 365 or Google Workspace, security tools) and you can't tell whether the line items even describe the same thing.
- A vendor tool will connect to your email, files or customer data, and you need to know what to ask about security first. AI vendor red flags: 12 questions to ask is a good starting list.
- You've already signed, and what you're getting doesn't match the quote.
If an outside read on a tech quote would help, get in touch.
Related reading
- Can AI Summarize a Contract? How to Use It Safely and What to Check
- AI Vendor Red Flags: 12 Questions to Ask Before a Tool Touches Client Data
- How Can I Make Sure AI Doesn't Give Me the Wrong Info?
Originally published July 2025. Updated November 2026.





No comments yet